4XWC – Explosion Proof Submersible Sewage Pump

Bell & Gossett : Wastewater Pumps & Packages : Sewage Wastewater Pumps

4XWC – Explosion Proof Submersible Sewage Pump

Features and Benefits

  • Impeller: Cast iron, two vane closed design for high efficiency and maximum wear life. Balanced for smooth operation.
  • Bronze Wear Ring: Replaceable to renew the running clearances and efficiencies to original conditions. Leakage diminishes considerably.
  • Casing: Heavy duty cast iron, volute type for maximum efficiency. 4″ ANSI class 125 cast iron flanged. Adaptable to slide rail system mounting.
  • Dual Mechanical Seals: Function independently for maximum motor protection. The failure of one seal does not affect the operation of the second. The upper seal uses carbon rotating and ni-resist stationary face materials. The lower seal uses carbon rotating and ceramic stationary face materials as s
  • Seal Sensor Probe: The pump has a moisture detection probe located in an oil filled seal chamber. If pumpage should leak past the lower seal it indicates to pump control panel a fault has occurred. Requires an Optional Seal Fail or Moisture Detection Circuit in the control panel.
  • Designed for Continuous Operation: Continuous duty submerged condition in water that is 40°C or below. Maximum runtime with pump unsubmerged for 71/2-15 HP is 1 hour and for 20-30 HP is 15 minutes. Motor is suitable for 10 starts per hour.
  • Bearings: Double row angular contact thrust bearing on 250TYS frame and single row deep groove thrust bearing on 210TY frame pumps.
  • Impeller Mounting Screw: 300 series stainless steel with antirotational locking patch.
  • Castings: All iron castings are ASTM A48 class 30 grey iron. Optional bronze impeller is ASTM B584 C87500 silicon bronze.

General Selection Tools:

  • ESP-PLUS for B&G Centrifugal Pumps, Booster Pumps, Pump Accessories, and Air Separator
  • ESP-PARTS for replacement parts selection
  • CAD Drawings for 2D and 3D dimensional drawings in many formats

Heat Exchanger Product Selection

Steam + Water Pressure Reducing Values

Sizing Tools:

Report Bugs/Request Enhancements
Please email the following address to report issues and request enhancements: ebusiness.support@xyleminc.com

Consult your local Bell & Gossett Representative for additional assistance.

Bell & Gossett is a leading manufacturer of pumps, valves, heat exchangers, and accessories for plumbing, wastewater, and HVAC—including steam and heat transfer—applications. To build and operate an efficient water system, you need both the right products and experts who know the application. Here, you can access Bell & Gossett’s trusted network of partners who have the experience you need to get the job done right.

To find a Bell & Gossett Representative in Canada select your Province: