DUAL SEAL WITH OPTIONAL SEAL SENSOR PROBE

Designed for high Head sewage applications where a gravity system is not practical. Ideal for pressure sewage systems.

Specifications

Solids handling capabilities: 3″ maximum
Discharge: 1 1⁄4″ NPT removable flange
Capacities: up to 46 GPM
Total heads: up to 106 feet TDH

Features and Benefits

  • Single phase pumps now have built-in overload protection.
  • Impeller: Silicon bronze, multi-vane semi-open, with pump-out vanes for mechanical seal protection. Balanced for smooth operation.
  • Grinder Cutter System: The anti-roping design, hardened cutter is keyed to the  motor shaft for positive drive. The cutter ring is specially designed to be reversed when the first side wears out thus doubling its life and reducing maintenance costs. The cutter system is designed and tested to pass items found in normal wastewater.
  • Casing: Heavy duty cast iron, volute type for maximum efficiency. Use with A10-12 guide rail system for ease of installation and maintenance.
  • Dual Mechanical Seals: Silicon carbide vs. silicon carbide outer seal and ceramic vs. carbon inner seal, stainless steel metal parts, BUNA-N elastomers. Upper and lower shaft seals are positioned independently and are separated by an oil-filled chamber. Optional Silicon/Tungsten Carbide outer seal available.
  • Optional Seal Sensor Probe: Located in oil-filled chamber. If pumpage should begin to leak past lower seal it indicates to pump control panel a fault has occurred. Requires optional Seal Fail Circuit in the control panel.
  • Fasteners and Pipe Plugs: 300 series stainless steel.

Models & Weights

12GDS1G31A1A – 110 lbs

12GDS1G21A1A – 110 lbs.

12GDS3G21A1A – 105 lbs.

12GDS3G31A1A – 105 lbs.

12GDS3G41A1A – 105 lbs.

12GDS3G51A1A – 105 lbs.

General Selection Tools:

  • ESP-PLUS for B&G Centrifugal Pumps, Booster Pumps, Pump Accessories, and Air Separator
  • ESP-PARTS for replacement parts selection
  • CAD Drawings for 2D and 3D dimensional drawings in many formats

Heat Exchanger Product Selection

Steam + Water Pressure Reducing Values

Sizing Tools:

Report Bugs/Request Enhancements
Please email the following address to report issues and request enhancements: ebusiness.support@xyleminc.com

Consult your local Bell & Gossett Representative for additional assistance.

Bell & Gossett is a leading manufacturer of pumps, valves, heat exchangers, and accessories for plumbing, wastewater, and HVAC—including steam and heat transfer—applications. To build and operate an efficient water system, you need both the right products and experts who know the application. Here, you can access Bell & Gossett’s trusted network of partners who have the experience you need to get the job done right.

To find a Bell & Gossett Representative in Canada select your Province: