Hoffman Specialty Steam Vents

Bell & Gossett : Steam Specialties : Vents

Model 4A Part No.401413 Air Valve (non-vacuum)

  • Float-type thermostatic vent
  • For residential or small one-pipe or two-pipe systems
  • Single non-adjustable port
  • 1/2 NPT female and 3/4  NPT male straight shank
  • Install 6-10? (150-250mm) above horizontal return and 18? (450mm) above the boiler water line
  • Maximum operating pressure 2 psig (0.13 bar)*
  • Maximum pressure 10 psig (0.7 bar)

Model 75 Part No. 401434 75H Part No. 401437 Air Valve (non-vacuum)

  • Float-type thermostatic vent
  • For medium and large systems
  • Single non-adjustable port
  • 1/2 NPT female and 3/4 NPT male straight shank
  • Maximum operating pressure*
    • Model 75 3 psig (0.2 bar)
    • Model 75H 10 psig (0.7 bar)
  • Maximum pressure 15 psig (1.0 bar)

Model 76 Part No. 401431 Vacuum Valve

  • Float-type themostatic vent
  • For medium and large one-pipe vacuum systems • Single non-adjustable port
  • 1/2 NPT female and 3/4 NPT male straight shank
  • Install 6-10? (150-250mm) above horizontal return and 8? (450mm) above the boiler water line
  • Maximum operating pressure 3 psig (0.2 bar)
  • Maximum pressure 15 psig (1.0 bar)

Special Steam Vents

  • Model 3 Part No. 401419 Steam Air Line Valve
  • Thermostatic vent (no float)
  • For Air Line or Paul Systems
  • Inlet 1/8 NPT, outlet 1/4 NPT
  • Maximum operating pressure 25 psig (1.7 bar)* to vacuum
  • Maximum pressure 25 psig (1.7 bar)

Model 4 Part No. 401416 Quick Valve

  • Thermostatic air vent
  • For steam systems and process equipment
  • Operates on temperature change only; does not close against water
  • Must be installed 6-10? (150-250mm) above horizontal return and 18? (450mm) above the boiler water line
  • 1/2 NPT female and 3/4 NPT male straight shank
  • Maximum operating pressure 25 psig (1.7 bar)*
  • Maximum pressure 25 psig (1.7 bar)

Model 74 Part No. 401428 Steam Unit Heater Air Valve

  • Float-type thermostatic vent • Single non-adjustable port
  • 1/2 NPT female and 3/4 NPT male straight shank
  • Install 6-10? (150-250mm) above horizontal return and 18? (450mm) above the boiler water line
  • Maximum operating pressure 35 psig (2.4 bar)*
  • Maximum pressure 35 psig (2.4 bar)

Guidelines

    Catalog Pages

      General Selection Tools:

      • ESP-PLUS for B&G Centrifugal Pumps, Booster Pumps, Pump Accessories, and Air Separator
      • ESP-PARTS for replacement parts selection
      • CAD Drawings for 2D and 3D dimensional drawings in many formats

      Heat Exchanger Product Selection

      Steam + Water Pressure Reducing Values

      Sizing Tools:

      Report Bugs/Request Enhancements
      Please email the following address to report issues and request enhancements: ebusiness.support@xyleminc.com

      Consult your local Bell & Gossett Representative for additional assistance.

      Bell & Gossett is a leading manufacturer of pumps, valves, heat exchangers, and accessories for plumbing, wastewater, and HVAC—including steam and heat transfer—applications. To build and operate an efficient water system, you need both the right products and experts who know the application. Here, you can access Bell & Gossett’s trusted network of partners who have the experience you need to get the job done right.

      To find a Bell & Gossett Representative in Canada select your Province: