Hoffman Specialty Convector Steam Vents

Bell & Gossett : Steam Specialties : Vents

Model 1B 
Part No. 401425
Air Valve (non-vacuum)

  •  Float-type vent
  • Adjustable port for true proportional venting – 6 port settings from slow (1) to fast (6)
  • Telescopic siphon tube
  • 1⁄4″ NPT straight shank
  • Maximum operating pressure 11⁄2 psig (0.1 bar)*
  • Maximum pressure 10 psig (0.7 bar)

Model 41 Part No. 401455
Model 43 Part No. 401458
Model 45 Part No. 401461
Air Valve (non-vacuum)

  • Single non-adjustable port
  • For small steam systems
  • Telescopic siphon tube with angle cut assures drainage
  • 1⁄8″ NPT straight shank (41) – 1⁄4″ NPT straight shank (43) – 1⁄2″ NPT female and 3⁄4″ NPT male straight shank (45)
  • Maximum operating pressure 6 psig (0.4 bar)*
  • Maximum pressure 10 psig (0.7 bar)

Model 71A Part No. 401470
Model 71B Part No. 401464
Model 71C Part No. 401467
Air Valve (non-vacuum)

  • Float-type vent
  • Single non-adjustable port
  • Meets Federal Specification WW-V-151 for Type 1 Non-Adjustable Valves
  • Telescopic siphon tube with angle cut assures drainage
  • 1⁄8″ NPT straight shank (71A) – 1⁄4″ NPT straight shank (71B) – 1⁄2″ NPT female and 3⁄4″ NPT male straight shank (71C)
  • Maximum operating pressure 11 psig (0.8 bar)*
  • Maximum pressure 15 psig (1.0 bar)

Model 508 Part No. 401475
Air Valve (non-vacuum)

  • Disc-type vent
  • Built-in Check Valve
  • For automatic venting of convectors and radiators
  • Can be disassembled to clean without removing from line • 1⁄8″ NPT straight shank
  • Maximum steam pressure of 15 psig (1.0 bar)

Catalog Pages

    General Selection Tools:

    • ESP-PLUS for B&G Centrifugal Pumps, Booster Pumps, Pump Accessories, and Air Separator
    • ESP-PARTS for replacement parts selection
    • CAD Drawings for 2D and 3D dimensional drawings in many formats

    Heat Exchanger Product Selection

    Steam + Water Pressure Reducing Values

    Sizing Tools:

    Report Bugs/Request Enhancements
    Please email the following address to report issues and request enhancements: ebusiness.support@xyleminc.com

    Consult your local Bell & Gossett Representative for additional assistance.

    Bell & Gossett is a leading manufacturer of pumps, valves, heat exchangers, and accessories for plumbing, wastewater, and HVAC—including steam and heat transfer—applications. To build and operate an efficient water system, you need both the right products and experts who know the application. Here, you can access Bell & Gossett’s trusted network of partners who have the experience you need to get the job done right.

    To find a Bell & Gossett Representative in Canada select your Province: