The industry standard circulator for decades, Series 100 is still the one by which most others are judged. With well over 10 million units installed, the Series 100 remains a leader in applications such as hydronic heating and domestic hot water circulation.

Series 100′s three-piece, oil lubricated design provides for easy field service with bearings, shaft and seal all housed in an assembly which can be easily repaired or replaced. The Series 100 oil lubricated motor is specifically designed for the Series 100, and its resilient mounting provides quiet, dependable service with minimum annual lubrication. UL and CSA listings are standard.

The design of this motor, coupled with its overall hydraulic performance, allows the Series 100 to overcome system related noise caused by valves, fittings, or piping.

Brochures

• Hydronic Heating and Plumbing Products (A 50U)
• Isolation Flanges NPT and Sweat Connections (A 117G)
• Full line of lead-free potable water products (A 151A)

Installation/Operation Manuals

• Check-Trol Isolation Flow Control Flange (A 118F)
• Isolation Flange Operational Limits (A07209C) (obsolete)
• Booster Pump Service Manual & Troubleshooting Guide (HS 105 SM R4)
• Replacement Instructions for Coupler Assembly and Motor Mount Sets (S15900E)
• Instructions for Replacing Booster Pump Bearing Assemblies (S17673D)
• Iron & Bronze Booster Pumps (P81748H)
• Replacement Seal Instructions (P90536B)

Parts Lists

• Service Parts Catalog Circulators and Centrifugal Pumps (HS 300H PL)
• Replacement Motors for 1/12 HP through 2 HP B&G Motor Parts (CP 25B PL)

Guidelines

• Zoning Made Easy Rules of Thumb (FH Z200B)
• Isolation Flange and Check-Trol® User Guide (FHD 18C)

Submittals

• Circulator Accessory: Check-Trol Isolation Flow Control Flange (A 129F)
• All Iron and Bronze Booster Pumps (A 120H)

General Selection Tools:

• ESP-PLUS for B&G Centrifugal Pumps, Booster Pumps, Pump Accessories, and Air Separator
• ESP-PARTS for replacement parts selection
• CAD Drawings for 2D and 3D dimensional drawings in many formats

Heat Exchanger Product Selection

• ESP-Thermal Plate Heat Exchanger Selection Program
• ESP-UTube Heat Exchanger Selection

Steam + Water Pressure Reducing Values

• Steam-2000 Pressure and Temperature Regulator
• Steam-1140 Temperature Regulator
• Water-1140 Temperature Regulator
• Steam-Traps

Sizing Tools:

• System Syzer
• System Syzer Psychrometry
• Steam-Pipe
• Steam-Loss
• Flash-Steam
• Condensate-Pipe

Report Bugs/Request Enhancements
Please email the following address to report issues and request enhancements: ebusiness.support@xyleminc.com

Consult your local Bell & Gossett Representative for additional assistance.

Bell & Gossett is a leading manufacturer of pumps, valves, heat exchangers, and accessories for plumbing, wastewater, and HVAC—including steam and heat transfer—applications. To build and operate an efficient water system, you need both the right products and experts who know the application. Here, you can access Bell & Gossett’s trusted network of partners who have the experience you need to get the job done right.

To find a Bell & Gossett Representative in Canada select your Province: