Series 1510 Base Mounted End Suction Pumps
Base-mounted, end-suction Series 1510 pumps are available in 1-1/4” through 8” sizes, 1/2 HP to 150 HP at 1750 RPM and 2 HP through 150 HP at 3500 RPM. Bronze-fitted and all iron material configurations are available with flows to 4000 GPM, heads to 500 feet.
i-ALERT condition monitor measures vibration and temperature at the outboard bearing and automatically indicates when pre-set levels of vibration and temperature have been exceeded, so that changes can be made before failure occurs.
Integrally cast volute foot and center drop-out spacer coupling combine to offer true back pullout capability, providing low-cost ease of maintenance. An ANSI-OSHA-compliant coupling guard shields the flexible coupler. A welded steel baseplate and internally flushed mechanical seal are standard features on this pump.
Brochures
- B 205G End Suction Pump System
- B 206F Series 1510 Centrifugal Pumps
- B 207H Series 1510 Centrifugal Pumps
- B 564 i-ALERT™ Condition Monitor
Installation/Operation Manuals
- P15758C Replacing the Bearing Frame Assembly or Pump Shaft
- P81555D Series 1510 Base Mounted Centrifugal Pump Kits
- P85504D Series 80, 1510 and 1531 Pumps Packing to Single Mechanical Seal
- P81673J Series 1510
- P2000140J Series 1510 (fr)
Parts Lists
- CP 206I PL Series 1510 Replacement Parts for Stuffing Box Type Centrifigual Pumps
- CP 207L PL Series 1510 Replacement Parts for Standard Design Pumps
Guidelines
- CP 514C Series 1510 Base Mounted End Suction Pumps Galvanized Steel Drip Pans
- CP 520C Pump Bearing Frame
- CP 521F Series 1510 Centrifugal Pump Kits
- CP 522F Series 1510 Centrifugal Pump Kits Pump Kit Contents
Specifications
Performance Curves
Submittals
- 1510 1 1/4 AC B 224G
- 1510 1-1 1/2 AC B 224.1F
- 1510 2AC B 224.2H
- 1510 2 1/2 AB B 224.3F
- 1510 3AC B 224.4I
- 1510 1 1/4 BC B 224.6G
- 1510 1 1/2 BC B 224.7I
- 1510 2BC B 224.8G
- 1510 2 1/2 BB B 224.9G
- 1510 3BC B 225K
- 1510 4BC B 225.1H
- 1510 5A B 225.4C
- 1510 4AC B 225.5G
- 1510 5BC B 225.6F
- 1510 6BC B 225.7D
- 1510 6E B 225.8E
- 1510 4E B 225.9F
- 1510 5E B 226E
- 1510 3E B 226.1G
- 1510 2E B 226.2F
- 1510 2G B 229E
- 1510 3G B 229.1E
- 1510 4GB B 229.2E
- 1510 5G (60 Cycle) B 229.3F
- 1510 6G (60 Cycle) B 229.4E
- 1510 8G B 229.5D
- 1510 6G (50 Cycle) B 229.6A
General Selection Tools:
- ESP-PLUS for B&G Centrifugal Pumps, Booster Pumps, Pump Accessories, and Air Separator
- ESP-PARTS for replacement parts selection
- CAD Drawings for 2D and 3D dimensional drawings in many formats
Heat Exchanger Product Selection
Steam + Water Pressure Reducing Values
- Steam-2000 Pressure and Temperature Regulator
- Steam-1140 Temperature Regulator
- Water-1140 Temperature Regulator
- Steam-Traps
Sizing Tools:
Report Bugs/Request Enhancements
Please email the following address to report issues and request enhancements: ebusiness.support@xyleminc.com
Consult your local Bell & Gossett Representative for additional assistance.
Bell & Gossett is a leading manufacturer of pumps, valves, heat exchangers, and accessories for plumbing, wastewater, and HVAC—including steam and heat transfer—applications. To build and operate an efficient water system, you need both the right products and experts who know the application. Here, you can access Bell & Gossett’s trusted network of partners who have the experience you need to get the job done right.