B&G Tank Heaters are 2 pass U-bend heat exchangers.
The B&G Tank and Heater offers many advantages, as it both heats and stores the water in the same unit. It can be operated by passing either steam or hot water through the coil and is an excellent heater for hard water territories. Large capacity in small spaces makes this heater particularly suitable for boiler rooms with low head room.

Type “TCW” & “TCS” Tank Heaters “U” Tube Design
B&G “TCW” and “TCS” Tank Heaters are of the shell and tube type. The tube bundle is of “U” bend construction with tube ends expanded into stationary tube sheet. This construction permits ample expansion or contraction for wide temperature variations. A fluid in the tank is heated by a fluid or steam circulated through the tubes. This unit is designed primarily for natural convection in the tank. Model TCS heads are furnished with tappings for Steam, Condensate, Vacuum Breaker and Vent connections. Model TCW heads are furnished with tappings for water connections.

APPLICATIONS:
Commercial.

Features and Benefits

  • Tubes are ¾” O.D. copper.
  • Heads are cast iron. Brass can be furnished on request. Temperature 375° F.
  • Tube sheets and welding collars are pressure vessel quality steel. Brass tube sheets can be furnished on request.
  • Tube supports are brass.
  • All materials furnished for pressure parts are certified to ASME specifications.
  • Units are available with stainless steel, 90/10 cupro nickel, Admiralty, and steel tubing. Consult factory for other variations.
  • Many Tank Heater applications require lining the tank with various materials i.e., epoxy phenolic, cement, etc. When the thickness of these linings exceed 0.01″, oversized construction must be provided. Consult factory.

General Selection Tools:

  • ESP-PLUS for B&G Centrifugal Pumps, Booster Pumps, Pump Accessories, and Air Separator
  • ESP-PARTS for replacement parts selection
  • CAD Drawings for 2D and 3D dimensional drawings in many formats

Heat Exchanger Product Selection

Steam + Water Pressure Reducing Values

Sizing Tools:

Report Bugs/Request Enhancements
Please email the following address to report issues and request enhancements: ebusiness.support@xyleminc.com

Consult your local Bell & Gossett Representative for additional assistance.

Bell & Gossett is a leading manufacturer of pumps, valves, heat exchangers, and accessories for plumbing, wastewater, and HVAC—including steam and heat transfer—applications. To build and operate an efficient water system, you need both the right products and experts who know the application. Here, you can access Bell & Gossett’s trusted network of partners who have the experience you need to get the job done right.

To find a Bell & Gossett Representative in Canada select your Province: